E-mail: newsales12@vip.163.com
Tel: +86-15829050512
Contact Us

Address: Unit3.Building1, No.3 Courtyard, Pailou Alley Dongguan South Street, Beilin Distrct, Xi'an, Shaanxi, China

Tel: +86-15829050512

Fax: +86-029-82490435


Home > Knowledge > Content

Rosemount Mass flowmeter

Oil Rosemount Mass flowmeter China supplier 

Ultimate real world performance

 Unchallengeable ELITE performance on liquid mass flow, volume flow, and density measurements

 Best-in-class gas mass flow measurement

 Reliable two-phase flow measurement for the most challenging applications

 Designed to minimize process, mounting, and environmental effects

Best fit-for-application

 Scalable platform for the widest range of line size and application coverage including hygienic, cryogenic, high pressure, and high temperature

 Available with the broadest range of I/O offerings highlighted by expansive digital protocol support 

Superior measurement confidence

 Smart Meter Verification delivers complete, online verification of device health and performance, continuously or on-demand at the press of a button

 Globally leading ISO/IEC 17025 calibration facilities offers best in class uncertainty of ±0.014%

 Intelligent sensor design mitigates the need for zero calibration in the field

Hardware failure

If there is an error is too large, Totalizer display is not lit or no value, the display is blank bits, etc. phenomenon, its causes:

a. non-standard installation, can directly lead to the meter zero drift, such as mass flow meter installed in the pump outlet closer, sensor support strong enough, improper connection flange welding stress signal cable by electromagnetic interference.

b. Wiring problem

If the display does not light phenomenon appears, check the power connection totalizer, if there burned fuse, make sure that the input voltage to the standard nominal voltage, AC and DC forms are the same. If there is another totalizer does not vary with traffic increases, you should check the totalizer wiring, if fitted totalizer forward / reverse procedure, check the meter wiring, because the flowmeter wiring is incorrect, make the totalizer in the reverse to not increment when the stream.

c. process media change

If the measurement media folder appears gas, gasification or two-phase flow phenomena, the transmitter will alarm display, serious, the sensor stops working.

d. Transmitter failure.

e. sensor failure.

f. purging pipe problem.